Gme TX2720 Manuale Utente Scaricare il pdf (Pagina 6)

PAGE 6 INSTRUCTION MANUAL TX2720

To Scan

Adjust the Squelch control so the radio is quiet,

then brieﬂy press the SCAN key. A high beep will

be heard,

will ﬂash on the display and the

channel numbers will change rapidly as the radio

begins scanning. If a signal is found, the radio

will pause on that channel and will remain there

as long as the channel remains busy. Once the

channel has been clear for 5 seconds, scanning

will resume.

NOTE: You must have at least two channels

programmed into the Scan memory otherwise

the radio won’t scan.

To Change the Scan Direction

Press the

or key. The radio will scan in the

direction of the selected channel key.

To Skip Over a Busy Channel and Resume

Scanning

Brieﬂy press the

or key. Scanning will

resume.

To Transmit on a Busy Channel

Wait for a break in the conversation, then press

the PTT

switch.TheradiowillexittheScan

mode and stay on the channel allowing you to

communicate with others on that channel.

To resume scanning brieﬂy press the SCAN key

again.

NOTE: If the PTT is pressed while the radio is

scanning, it will be ignored and a low beep will

be heard when the PTT is released.

To Exit the Scan Mode Manually

Brieﬂy press the SCAN key.

will stop

ﬂashing on the display.

NOTE:

Excessivenoiseonachannelcancause

the scanning to pause on that channel even

if there is no signal there. If this only happens

on one channel, you may need to remove that

channel from the scan memory. If it happens

on all channels, you should try increasing the

squelch setting.

PRIORITY CHANNEL

The Priority channel is preset to channel 8

allowing it to be instantly recalled at the press

of a key.

To Use the Priority Channel

Simply press the Priority key at any time. The

radio will jump straight to channel 8. If Scan or

DW was selected, they will be cancelled.

To Return to the Previously Selected

Channel

Press the Priority key again.

DUAL WATCH

Dual Watch allows your TX2720 to monitor both

the Priority channel and another selected channel

by quickly switching between them. Any signals

received on the Priority channel take precedence

over signals on the selected channel.

To use the Dual Watch feature, adjust the

Squelch control so the radio is quiet, select

your preferred channel using the

or keys

or rotary channel switch then press the DW key.

‘D/W’ will appear on the display and the channel

display will alternate between your selected

channel and the Priority channel.

If a signal is received on your selected channel,

the radio will pause on that channel but will

continue to switch to the Priority channel every

2 seconds and a brief interruption to the signal

will be noticed. Once the signal has gone, normal

Dual Watch switching will resume.

If a signal appears on the Priority channel at

any time, the radio will stop switching and will

remain on the Priority channel for as long as

the signal is present. Once the signal has gone,

normal Dual Watch switching will resume.

NOTE: If you press the PTT switch while Dual

Watch is selected, your TX2720 will transmit on

the selected channel. If you wish to talk on the

Priority channel, press the Priority key to cancel

the Dual Watch and switch straight to the

Priority channel.

1 2 3 4 5 6 7 8 9 10 11 12

Commenti su questo manuale

Nessun commento